PRICE SHOWN IS FOR BAG OF 5 SPADE CONNECTORS
STOCKED IN (6) SIZES FOR 10 TO 22 GAGE WIRE AND 3-4 OR 6 MM HOLES
Heat Shrink Terminals
• Sealed electrical terminals that prevent water, salt spray, and corrosive elements from reaching your copper wires • Self insulating with 3:1 adhesive lined tubing that flows to fill the connection • 22 AWG to 8 AWG, color coded for wire size • 600V and temp. rated 10°C to 150°C • Ideal applications in marine, heavy trucking, construction, motorcycles and where a tough connection needs to hold up to the harshest environments •
Simply crimp your wire into the connector just like you would a regular connector then hit it with a heat gun or other heat source. The tube at the end of the connector will shrink around the wire and seal it with a glue that is inside the tube.
To order you must key an attribute below to indicate what size you want, If you want 2 bags of the same size just put (2) in the add to cart box then hit add to cart. If you want (2) bags of (2) different sizes you must order them individually.
SOLD 5 PER BAG PRICE SHOWN IS FOR BAG OF 5 SPADE CONNECTORS
Photo above shows connectors after they have been heat shrunk. Note the sealant glue that is where the wire goes in. This glue not only seals the connector but helps hold the wire from pulling lose.