POWERLET POWER PLATE Fits 2003 and newer
Fits MCL and Heli Riser Cover With 3/8 Threaded Hole
Combines The Powerlet socket with your riser cover for a fast convenient way to provide power to you Ram Ball mounted electronics. You will need to use the MCL or Heli riser plate cover Plate is glass bead finish.
The MCL Powerlet plate can be either held in place with a Ram ball (sold separately) or the Phillips head screw (included) shown in the photo. If using the Ram ball: The plate is counter bored to allow for ample thread engagement into the MCL nut.
Comes with 5 feet of 14 gage tin coated wire and covered with shrink tube and wire tubing. Wire to your battery with an inline fuse.
|
|
 |
| Bracket clears tank when turned, wires fed under tank to battery. |
Hold on riser plate with Screw or Ball
|
