FJR-1300 RISER PLATE 2006 AND NEWER

7010
Sale price is for will call or shipped not installed.
The tallest riser plate on the market!

FJR1300 RISER PLACE WITH HARDWARE
Motorcyclelarry owns and drives a 2007 FJR-1300A and loves his riser.

 Great Video on installing a MCL Riser Plate http://www.youtube.com/watch?v=eAAPPp4s4mg

2006 AND NEWER

Fits Both U.S. and Euro/ Canadian Models, Make Choice Below

: MCL's FJR1300 Riser Plate for the 2006 and newer model years is truly unique. Machined from a 18 pound solid billet of 6061 T6 aircraft aluminum it features more strength and rigidity than bolt together designs. 

: The MCL riser brings the bars 1 3/4" (back) closer to the driver and raises them up 1 1/2" also with out having to add additional spacers.

: Like our previous model years we have rotated the bar ends forward (4 degrees) for a more relaxed ride with guaranteed less wrist strain than any other riser or riser plate on the market. Iron Butt Proved!

: All stock hydraulic lines, cables and control housing wire looms are retained and maintain proper slack when the bars are moved from extreme right to left. 

: Greatly increased fork/ triple tree strength for tighter turns and longer tire life.

: Less fatigue and vibration than stock.

: 3 Ram Ball Mount's Two on the plate and we include our Ram Ball Stem Nut at no additional charge for mounting your electronics. A $27.00 value free. Balls sold separately.

United States and Euro/ Canadian models now available.  The U.S. model has a smaller ignition hole than the Euro/ Canadian model. 

: Install Time 1 hour or less

: Installation is easier also with a new drill fixture that allows you to drill out the anti tamper screws from your ignition WITHOUT having to take the gas tank off and half the bike apart.

TALLER, MORE RIGIDITY, EASIER INSTALLATION, LESS COST,  THAN THE COMPETISION 

DRILL FIXTURE INFORMATION: We offer the drill fixture and a split point cobalt drill as a loan with a $100.00 deposit plus $5.00 for the return postage envelope. This fixture is irreplaceable when it comes to drilling out the anti tamper bolt screw heads. These screws have a cone for a head and cannot be removed without drilling off the heads of the bolts. Check off the option for the fixture and drill and we will include it with your riser. Use it for up to 30 days then return it and we will credit your credit card a $100.00. You will get a postage paid return envelope to return the fixture in. Be sure to look at all the photos at the bottom of the page. These show the installation.

You will need a 36 MM socket to remove the stem nut.

The letter below tells a little more about our riser plate:

Hello Michael, 

Thank You for your inquiry.  What we have done dates back to the pre 2006 FJR's.  The FJR has always had the bars at at pretty inward angle and many people, myself included got wrist pain from having the angle inwards.  In 2004 we started making the "riser blocks" available with a 6 degree outward rotation which moves the bar tips forward.  Although this moved the bars away from the rider a small amount the reduction in wrist fatigue far out weighed the lose in pull back. 

When we designed the riser plate for the 2006 and newer FJR's we rotated them only 4 degrees outward as this seemed to be a happy medium for comfort and pull back.  Our riser plate incorporates the riser block as an integral part of the plate, you don't have to buy additional spacers that reduce rigidity and increase cost.  

I have owned a 2006 AE model FJR and now a 2007 A model FJR and rode both bikes extensively during R&D of the riser plate.  I believe you will find as hundreds of others have that our riser plate incorporates the best ergonomics and the most economical price of any aftermarket riser plate sold today. 

Thank You,
Larry E. Wilkin 

 The photo of the U.S. model shown below has set screws installed where the balls go when you receive it.  If you want to use the balls remove the set screws and replace with balls.  

Euro/ Canadian Model	U.S Model

The above photo and info was provided to me by Gene Sweeney Jr..  This mod is not absolutly required but will loosen up your cables.

Click here to see our new Powerlet FJR-1300 power outlet that mounts to your stem nut.

____________________________________________________________

MCL 1 piece (no optional blocks required) tall riser plate $299.00

Why play with blocks to get the highest riser plate made and save $109.00 with MCL plus you get the rigidity of a 1 piece riser plate and can barrow our drill fixture that can save you an hour of labor plus not having to take your gas tank off.

What they are saying
____________________________________________________________